A NEW BREED OF EQUIPMENT IS HERE
The Traditional Methods of Spraying Large Commercial Roofs are Over
THE ROOF RABBIT
is Your #1 Solution for Effortlessly Installing Commercial Roof Coating Systems to Large Metal and Flat Roofs
**Patented and Industry Acclaimed**

What is a Roof Rabbit?
The Roof Rabbit is a cantilever spraying apparatus that allows the user to stay in an upright ergonomically comfortable position, while consistently spraying 2x the square footage of roofs with the same equipment and man power.
This gives you the owner increased production, decreased labor, increased mil consistency, & less worker fatigue.
The Roof Rabbit was designed by a roofer for roofers, as a lightweight, ergonomic, fully functional, stand alone unit that will increase your bottom line. PERIOD
Reap the Benefits of the Roof Rabbit

MINIMIZE WORKER FATIGUE
Due to the ergonomic design of the Roof Rabbit the user is allowed to stay standing in an upright position and naturally walk. This minimizes back fatigue thus increases production.

FASTER, CLEANER INSTALLS
Combine the ergonomics and lightweight and then look at the unique method of vertical spray application you will have less stitch lines and they will remain cleaner longer leaving your roof aesthetically pleasing for greater periods.

ENHANCE YOUR BUSINESS
With the aforementioned decrease in worker fatigue you can now cover more roof in less time as well as use less material due to a consistent application height and position.

QUALITY CONSTRUCTION
The Roof Rabbit is constructed from Lightweight Aluminum Tubing that has been Tig/Mig welded by certified welders and the unit is designed for many years of service.
Run, Rabbit, Run...
Apply roof coatings faster, smarter, better with the Roof Rabbit
About the Rabbit:
Structural Design
All Lightweight Aluminum frame with all stress points welded and gusset reinforced.
Applications
R-Panel, SSR, SLR, EPDM, TPO, Mod-Bit, & SPF
Stability
By the use of a folding rear 3rd wheel it allows for a stable free standing unit that carries its own weight thus minimizing fatigue, & the 3rd wheel becomes your brake when not in use.
Ease of Storage
The unit is designed to fold up and store in as minimal area as possible to be used when needed and then stored in trailers and take up little valuable space.
Wheels
The wheels are spaced on an 18″ width to span and accept most common metal roof panel profiles.
Left or Right Orientation
With a slide thru Bulkhead design this unit can be used in both left hand and right hand orientations to better suit your projects needs.
Tip Adjustability
With the addition of the Spray tip drop tubes you have the ability to adjust the spray tip height up and down as well as move tip locations to fit various metal roof profile spacings.

THE ROOF RABBIT
Elevating the Fluid Applied Industry Since 2018
How it Works
By reducing user fatigue, increasing production and minimizing over usage of product the Roof Rabbit makes any other method just plain SILLY.

Remove your gun's extension wand and Hook the Roof Rabbit unit straight to your existing coating gun. (Recommend Graco Silver Gun)

Position the boom orientation to fit the direction of the roof layout that you are installing. Squeeze the handle and start walking up/down the roof, using the attached detail gun to spray anything the unit can't get to.

Pull out your Smart Phone and take final pictures of your completed project, and share them to our Facebook, Instagram, Twitter pages for a chance to be our highlighted contractor.
What they're saying about The Roof Rabbit:
"The Roof Rabbit is awesome. Cuts time in half! Super easy to operate." - Jon M.
"My back hurt more from 20 minutes of detail work with my wand than it did during 4 hours of work with The Roof Rabbit." - Billy P.
"Get the right tools for the job! Nowadays you gotta be more efficient than the next guy. The Roof Rabbit helps you do that." - Josh C.
"The Roof Rabbit doubles the amount of coatings we can spray. If you have a big roof, this is the rig you want on the end of your pump." - Neil O.
OTHER PRODUCTS BY THE ROOF RABBIT
The Rabbit Foot
The Rabbit Foot is designed specifically for those pain in the neck SLR & SSR standing seam roof panels. Until now you only options were to use brushes, rollers or literally lay down to get the underneath side of the vertical section of the profile. This adds significant time and labor to a job.
Now with the Rabbit foot you simply will be able to screw the provided 20" extension wand onto your existing Graco G Thread wand and stay standing up and easily adjust the angle of your pattern to fully coat the underneath side of the SLR/SSR profile.

The Rabbit Hutch
The Rabbit Hutch is our method of giving the user the ability to help minimize potential overspray. Anytime there is pressurized spray system there is overspray, so we can not eliminate it.
The goal with the flow through screen material that we incorporate allows the wind to still pass through but dramatically reduce the velocity of it.
This allows the remaining fines to attach to the down wind side of the screen and not blow off of your roof. We designed it to still allow easy access to adjust your tip width and angles without removing the unit.
FAQs
What Size Pump Do I Need?
Are the Tips Adjustable?
What Chemistries Will It Spray?
What About Overspray?
Can I Spray Multiple Directions?
What's the Return Policy?
IT'S TIME TO MAKE THE JUMP
THE ROOF RABBIT
is Your #1 Solution for Effortlessly Installing Commercial Roof Coating Systems to Large Metal and Flat Roofs